The JDSU Eight-port E1/T1 LIM (J6824A) helps network professionals isolate and resolve network problems quickly on ATM Inverse Multiplexing for ATM (IMA) and 3G networks
The JDSU Eight-port E1/T1 LIM (J6824A) helps network professionals isolate and resolve network problems quickly on ATM Inverse Multiplexing for ATM (IMA) and 3G networks.
- Can be used with the Network Analyzer – Wireline Protocol Test (J6840), Protocol Analysis Probe – DNA (J6801B) and Protocol Analysis Probe – DNA MX (J6802B) platforms.
- Hot-swappable – a LIM can be removed safely while an application is running and another LIM inserted in its place; the current application terminates and the user can launch another suitable application for the new LIM without having to power down and restart the analyzer.
The JDSU Eight-port E1/T1 LIM (J6824A) for the Network Analyzer – Wireline Protocol Test (J6840) offers real-time ATM IMA analysis and troubleshooting on up to eight ports.
The JDSU Eight-port E1/T1 LIM (J6824A) is the first to offer multiport IMA analysis on a hot-swappable interface and on a portable field service tool. This enables network operators to purchase one Network Analyzer for use in troubleshooting any LAN and WAN technology, from E1/T1 to Gigabit Ethernet, including multi-port IMA.
Operational Modes:
- For the Network Analyzer application:
– single-port ATM
– multi-port ATM IMA
– multi-port ISDN PRI layer 2 decodes
- For the Signaling Analyzer application:
– single-port ATM
– multi-port ATM IMA
– multi-port Channelized with HDLC (SS7, Frame Relay and ISDN) or TRAU 16K framing
JDSU Eight-port E1/T1 LIM Features
- Industry First: Eight-port ATM IMA on a portable platform with hot-swappable interfaces
- Lowest cost per port for ATM IMA analysis
- 2G/2.5G/3G channelized eight-port analysis for the JDSU Signaling Analyzer
- Eight-port E1/T1 passive monitoring taps available for convenient and efficient connections to a network
- The J6824A LIM can be configured to operate with T1 (1.5 Mb/s) or E1 (2 Mb/s) line rate with DS1 or E1 framing, respectively, at RJ-48C 8-pin connectors, suitable for balanced 100 Ohm T1 or 120 Ohm E1 interfacing, or unbalanced 75 Ohm E1 interfacing
- Cable options provide 8 dual Bantam connector cables terminated in an RJ48C plug; or 8 dual 75 Ohm BNC connector cables terminated in an RJ48C plug; or 8 balanced cables which swap cable pairs between RJ48C pins [1,2]/[4,5] to RJ45 pins [5,4]/[6,3]
- Real-time simultaneous AAL-2 or AAL-5 reassembly on more than 4000 ATM virtual channels (user controls which)
- ATM Policing, Traffic Contract Estimation and 1-point CDV on multiple virtual circuits simultaneously